Free CCNP 350-401 Encor Dumps - 2022 Updated with 350-401 Practice Exam Questions with PDF CCNP Encor Dumps.

1. Refer to the exhibit                                                                                                                                                 

Which type of antenna do the radiation patterns present?

2. Which reason could cause an OSPF neighborship to be in the EXSTART/EXCHANGE state?

3. When configuring WPA2 Enterprise on a WLAN, which additional security component configuration is required?

4. A customer has several small branches and wants to deploy a Wi-Fi solution with local management using CAPWAP.

Which deployment model meets this requirement?

5. Refer to the exhibit.                                                                                                                                                 

The WLC administrator sees that the controller to which a roaming client associates has Mobility Role Anchor configured under Clients > Detail.

Which type of roaming is supported?

6. Which feature is supported by EIGRP but is not supported by OSPF?

7. A local router shows an EBGP neighbor in the Active state. Which statement is true about the local router?

8. Refer to the exhibit                                                                                                                                                   

SwitchC connects HR and Sales to the Core switch. However, business needs require that no traffic from the Finance VLAN traverse this switch.

Which command meets this requirement?

9. Refer to the exhibit.                                                                                                                                               

An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as the exit point.

Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplishes this task?

10. Which feature of EIGRP is not supported in OSPF?

11. Which NTP Stratum level is a server that is connected directly to an authoritative time source?

12. Refer to the exhibit.                                                                                                                                                 

An engineer reconfigures the port-channel between SW1 and SW2 from an access port to a trunk and immediately notices this error in SW1's log:

*Mar 1 09:47:22.245: %PM-4-ERR_DISABLE: bpduguard error detected on Gi0/0, putting Gi0/0 in err-disable state

Which command set resolves this error?

13. When a wireless client roams between two different wireless controllers, a network connectivity outage is experienced for a period of time.

Which configuration issue would cause this problem?

14. What is the role of the RP in PIM sparse m Qode?

15. Why is an AP joining a different WLC than the one specified through option 43?

16.

Company policy restricts VLAN 10 to be allowed only on SW1 and SW2. All other VLANs can be on all three switches. An administrator has noticed that VLAN 10 has propagated to SW3.

Which configuration corrects the issue?

17. Which First Hop Redundancy Protocol should be used to meet a design requirement for more efficient default gateway bandwidth usage across multiple devices?

18. A client device roams between access points located on different floors in an atrium. The access points are joined to the same controller and configured in local mode. The access points are in different AP groups and

have different IP addresses, but the client VLAN in the groups is the same. Which type of roam occurs?

19. Which DHCP option helps lightweight APs find the IP address of a wireless LAN controller?

20. Refer to the exhibit.                                                                                                                                                         

A network engineer is configuring OSPF between router R1 and router R2. The engineer must ensure that a DR/BDR election does not occur on the Gigabit Ethernet interfaces in area 0.

Which configuration set accomplishes this goal?

21. Refer to the exhibit                                                                                                                                                     

Which type of antenna does the radiation pattern represent?

22. Wireless users report frequent disconnections from the wireless network. While troubleshooting, a network engineer finds that after the user is disconnected, the connection re-establishes automatically without any input required. The engineer also notices these message logs:

AP 'AP2' is down. Reason: Radio channel set. 6:54:04 PM AP 'AP4' is down. Reason: Radio channel set. 6:44:49 PM AP 'AP7' is down. Reason: Radio channel set. 6:34:32 PM

Which action reduces the user impact?

23. Refer to the exhibit.                                                                                                                                                 

The inside and outside interfaces in the NAT configuration of this device have been correctly identified. What is the effect of this configuration?

24.                                                                                                                                                                                  Refer to the exhibit. Which command must be applied to R2 for an OSPF neighborship to form?

25.

Refer to the exhibit. Which router is the designated router on the segment 192.168.0.0/24?

26.

Refer to the exhibit. Which two commands are needed to allow for full reachability between AS 1000 and AS 2000? (Choose two.)

27.

Refer to the exhibit. An engineer attempts to configure a router on a stick to route packets between Clients, Servers, and Printers; however, initial tests show that this configuration is not working. Which command set resolves this issue?

28. How does SSO work with HSRP to minimize network disruptions?

29.

Refer to the exhibit. Which command when applied to the Atlanta router reduces type 3 LSA flooding into the backbone area and summarizes the inter-area routes on the Dallas router?

30. An engineer must configure interface GigabitEthernet0/0 for VRRP group 10. When the router has the highest priority in the group, it must assume the master role. Which command set must be added to the initial configuration to accomplish this task?

Initial Configuration interface GigabitEthernet0/0

description To IDF A 38-24-044.40

ip address 172.16.13.2 255.255.255.0

31.

Refer to the exhibit. Which two commands ensure that DSW1 becomes the root bridge for VLAN 10 and 20? (Choose two.)

32.

Refer to the exhibit. R1 is able to ping the R3 fa0/1 interface. Why do the extended pings fail?

33.

Refer to the exhibit. Which command allows hosts that are connected to FastEthernet0/2 to access the Internet?

34.

Refer to the exhibit. What are two effects of this configuration? (Choose two.)

35.

Refer to the exhibit. An engineer must ensure that all traffic entering AS 200 from AS 100 chooses Link 2 as an entry point. Assume that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers. Which configuration accomplishes this task?

36. Which DHCP option provides the CAPWAP APs with the address of the wireless controller(s)?

37. Refer to the exhibit.                                                                                                                                             

Which two commands ensure that DSW1 becomes root bridge for VLAN 10? (Choose two.)

38. What mechanism does PIM use to forward multicast traffic?

39. Refer to the exhibit.                                                                                                                                               

The traceroute fails from R1 to R3. What is the cause of the failure?

40. Refer to the exhibit.                                                                                                                                               

The traceroute fails from R1 to R3. What is the cause of the failure?

41. Refer to the exhibit.                                                                                                                                             

An engineer must establish eBGP peering between router R3 and router R4. Both routers should use their loopback interfaces as the BGP router ID.

Which configuration set accomplishes this task?

42. An engineer is configuring GigabitEthernet1/0/0 for VRRP. When the router has the highest priority in group 5, it must assume the master role.

Which command set should the engineer add to the configuration to accomplish this task?

interface GigabitEthernet1/0/0 description To IDF A 38-70-774-10 ip address 172.16.13.2 255.255.255.0

43. Which two security features are available when implementing NTP? (Choose two.)

44. How does the EIGRP metric differ from the OSPF metric?

45. Refer to the exhibit.                                                                                                                                                 

An engineer is installing a new pair of routers in a redundant configuration.

Which protocol ensures that traffic is not disrupted in the event of a hardware failure?

46.

Refer to the exhibit. After an engineer configures an EtherChannel between switch SW1 and switch SW2, this error message is logged on switch SW2:

SW2#

09:45:32: %PM-4-ERR_DISABLE: channel-misconfig error detected on Gi0/0, putting Gi0/0 in err-disable state 09:45:32: %PM-4-ERR_DISABLE: channel-misconfig error detected on Gi0/1, putting Gi0/1 in err-disable state

Based on the output from switch SW1 and the log message received on switch SW2, what action should the engineer take to resolve this issue?

47.

Refer to the exhibit. Communication between London and New York is down. Which command set must be applied to resolve this issue?

48. Which encryption hashing algorithm does NTP use for authentication?

49.

Refer to the exhibit. The trunk between Gig1/0/1 of switch SW2 and Gig1/0/1 of switch SW1 is not operational. Which action resolves this issue?

50.

Refer to the exhibit. Which two facts does the device output confirm? (Choose two.)

51.

Refer to the exhibit. Which type of antenna is shown on the radiation patterns?

52.

Refer to the exhibit. All switches are configured with the default port priority value. Which two commands ensure that traffic from PC1 is forwarded over the Gi1/3 trunk port between DSW11 and DSW2? (Choose two.)

53. A company has an existing Cisco 5520 HA cluster using SSO. An engineer deploys a new single Cisco Catalyst 9800 WLC to test new features. The engineer successfully configures a mobility tunnel between the 5520 cluster and 9800 WLC. Clients connected to the corporate WLAN roam seamlessly between access points on the 5520 and 9800 WLC. After a failure on the primary 5520 WLC, all WLAN services remain functional; however, clients cannot roam between the 5520 and 9800 controllers without dropping their connection. Which feature must be configured to remedy the issue?

54.

Refer to the exhibit. Which configuration change ensures that R1 is the active gateway whenever it is in a functional state for the 172.30.110.0/24 network?

55. A customer has completed the installation of a Wi-Fi 6 greenfield deployment at their new campus. They want to leverage Wi-Fi 6 enhanced speeds on the trusted employee WLAN. To configure the employee WLAN, which two Layer 2 security policies should be used? (Choose two.)

56. Which two actions, when applied in the LAN network segment, will facilitate Layer 3 CAPWAP discovery for lightweight AP? (Choose two.)

57.

Refer to the exhibit. A network engineer configures OSPF and reviews the router configuration. Which

interface or interfaces are able to establish OSPF adjacency?

58. Which two methods are used by an AP that is trying to discover a wireless LAN controller? (Choose two.)

59. Which access point mode allows a supported AP to function like a WLAN client would, associating and identifying client connectivity issues?

60. Refer to the exhibit.                                                                                                                                                     

Based on the configuration in this WLAN security setting, which method can a client use to authenticate to the network?

61. A client device fails to see the enterprise SSID, but other client devices are connected to it. What is the cause of this issue?

62. Which two descriptions of FlexConnect mode for Cisco APs are true? (Choose two.)

63. An engineer is concerned with the deployment of a new application that is sensitive to inter-packet delay variance. Which command configures the router to be the destination of jitter measurements?

64. Which IP SLA operation requires the IP SLA responder to be configured on the remote end?

65.

Refer to the exhibit. What does the error message relay to the administrator who is trying to configure a Cisco IOS device?

66. Which three methods does Cisco DNA Center use to discover devices? (Choose three.)

67. Which statement about TLS is accurate when using RESTCONF to write configurations on network devices?

68. What do Cisco DNA southbound APIs provide?

69. Which statement about an RSPAN session configuration is true?

70. Which feature must be configured to allow packet capture over Layer 3 infrastructure?

71. Refer to the exhibit.                                                                                                                                               

What is the result when a technician adds the monitor session 1 destination remote vlan 223 command?

72.

Refer to the exhibit. An engineer configures monitoring on SW1 and enters the show command to verify operation. What does the output confirm?

73. A network is being migrated from IPv4 to IPv6 using a dual-stack approach. Network management is already 100% IPv6 enabled.

In a dual-stack network with two dual-stack NetFlow collectors, how many flow exporters are needed per network device in the flexible NetFlow configuration?